(0)
Control 126 W
 JBL-ს CONTROL CONTRACTOR სერიის დინამიკები უზრუნველყოფს ფონური მუსიკის მაღალი ხარისხით გაჟღერებას ისეთ გარემოში, როგორიცაა: მისაღები სივრცეები, საკრუიზო გემები, მუზეუმები, მაღაზიები, რესტორნები, კაფეები.   SPECIFICATIONS   Frequency Range 38 Hz - 20 kHz (-10 dB)   Power Capacity 200 W Peak 100 W Continuous Program Power 50 W Continuous Pink Noise   Sensitivity 88 dB SPL, 1W, 1 m (3.3 ft)   Nominal Impedance 8 ohms   Low Frequency 165 mm (6.5 in) polymer-coated aluminum cone.   High-Frequency 25 mm (1 in) pure-titanium dome with cloth suspension on low-diffraction swivel-mount with -10 degree aimability.   Terminations Screw-down Euroblock-type connector. Max wire size 14 AWG (1.5 mm)2   Crossover Network 3rd order (18 dB/oct) Low Pass to the woofer and 3rd order (18 dB/oct) High Pass to the tweeter.
742.5
CROWN CDI DRIVECORE
CDi DriveCore სერია არის ხმის გამაძლიერებელ მოწყობილობებს შორის ევოლუციური, უზრუნველყოფს მაღალი დონის შესრულებას, წარმოადგენს ფუნქციურად მდიდარ კომპლექტს და გააჩნია კონკურენტუნარიანი ღირებულება. გვთავაზობს მოქნილ ფუნქციებს, გამოიყენება როგორც მცირე, ისე საშუალო ზომის სივრცეებში, რესტორნებში, მაღაზიებსა თუ სხვა მსგავს დაწესებულებებში. CDi DriveCore- ის მოდელებში ჩატვირთულია სხვადასხვა დინამიკების სიხშირე, რათა ინსტალაციის პროცესი იყოს მარტივი და სწრაფი. Features DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design. Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network. DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration Input Router Input Delay – Up to 1000ms Input Parametric EQ – 8 band Crossover Output Parametric EQ – 8 band Output Delay – Up to 100ms LevelMAX™ Limiter BLU link (BL models only) – Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link Direct Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications. Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface. GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.   
3210
dbx csa 140z
      გამაძლიერებელი იყენებს Crown's DriveCore  ტექნოლოგიას საიმედო და ეფექტური ჟღერადობის მისაღებად.        Key Features 40W into 4 or 8 Ohms Switch-Mode Universal Power Supply DriveCore-Based Amplification Supports 70V and 100V Installations
945
JBL CBT 1000 + CBT 1000E System
 LINE ARRAY  სერიის CBT1000 კედლის პასიური დინამიკი კომბინაციაში CBT1000E-თან ერთად, ჩაშენებული კროსოვერი სისტემით უზრუნველყოფს ბას შესრულების მაღალ ხარისხს.            FEATURES Components: Six (6) 165 mm (6.5 in) high-excursion LF drivers (CBT1000E) 1500 Watt power handling (CBT1000E) Built-in purpose-designed crossover network, for combining with CBT1000 (CBT1000E) Coupler plate included (CBT1000E) Extended pattern control Components: Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and Twelve (12) 165 mm (6.5 in) high-excursion LF drivers (CBT1000+1000E) 3000 watt power handling (CBT1000+1000E) Patent-pending Constant Beamwidth Technology ™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing. Vertical pattern coverage is individually adjustable through a range of four (4) “Pattern Up” angles and four (4) “Pattern Down” coverage angles for a total of sixteen (16) different coverage combinations, all without the use of external DSP processing (CBT1000) Patent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw, narrower for long-throw) delivering superior coverage in both the front and rear corners of a room (CBT1000) Single-speaker system room coverage at high SPL, with little over-splash and strong bass response down to below 38 Hz (CBT1000+1000E) Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode (CBT1000) Swivel (pan)/tilt wall bracket and coupler plate included.
13891.5
JBL CSA2300Z
           Key Features Dual 300 W Channel Output For Commercial and Industrial Use Integrated Output Transformer: 100V, 70V Euroblock and RCA Mono Sum Inputs
2625
JBL Intellivox HP-DS370
             განსაკუთრებულად ძლიერი, სვეტის ფორმის დინამიკი, გარე გამოყენების (IP-55 ) შესაძლებობებით. უზრუნველყოფს დაბალი სიხშირის კონტროლსა და ჟღერადობის გაძლიერებას.              FEATURES Superb Speech Intelligibility IP-55 Outdoor Capable Integrated Amplification and DSP Slim Unobtrusive Design Extended Frequency Response - up to 18kHz Wide Horizontal Dispersion Vertical Beam Shaping (DDS Technology) 32-bit floating point DSP Control of Vertical Beam Shaping Dual Line Inputs Volume Control Delay (up to 20 seconds) 8 band parametric EQ 8 user definable, password protected presets on board (recallable through third party control devices) AVC (Automatic Volume Control) via build-in ambient mic. Upgradeable firmware Network Ready Integral Surveillance Simulation via DDA, Catt-Acoustic, Odeon and EASE4.3              Applications Transport Hubs Sports Arenas Large Places of Worship Lecture Halls and Theatres Large Conference Facilities Atriums Museums             Options Full range of mounting accessories Color matching service  
69768
JBL 8124
8124 ეს არის 4 ინჩიანი სრული სპექტრის ჭერის დინამიკი, ძირითადად კომერციული გამოყენებისთვის. მინიმალური ენერგიის გამოყენებით უზრუნველყოფს მაქსიმალურ ჟღერადობას.  SPECIFICATIONS   Component 4 in (100 mm), Full-range Driver   Frequency Range 60 Hz – 18 kHz   Sensitivity 93 dB (1 kHz – 8 kHz), 1W, 1M   Coverage 130° conical   70V/100V Taps 6W, 3W, 1.5W (0.75W at 70V only)   Termination Bare wires   Dimensions (Diameter x Depth) 8.1 in (206mm) x 3.5 in (89mm)   Weight 2.5lb (1.2kg)   Included Accessories Sculpted Grille   Optional Accessories MTC-8124C C-ring, MTC- Rail tile rails
139
JBL 8128
 8128 ეს არის 8 ინჩიანი სრული სპექტრის ჭერის დინამიკი, ძირითადად კომერციული გამოყენებისთვის. მინიმალური ენერგიის გამოყენებით უზრუნველყოფს მაქსიმალურ ჟღერადობას.  SPECIFICATIONS   Component 8 in (200 mm), Full-range Driver   Frequency Range 50 Hz – 16 kHz   Sensitivity 97 dB (1 kHz – 8 kHz), 1W, 1M   Coverage 90° conical   70V/100V Taps 6W, 3W, 1.5W (0.75W at 70V only)   Termination Bare wires   Dimensions (Diameter x Depth) 11.3 in (287mm) x 4.1in (105mm)   Weight 3lb (1.4kg)   Included Accessories Sculpted Grille   Optional Accessories MTC-8124C C-ring, MTC-Rail tile rails  
180
JBL 8138
8138 ეს არის 200 მმ-იანი სრული სპექტრის ჭერის დინამიკი, ძირითადად კომერციული გამოყენებისთვის. რესტორნებისა და გაქირავებისთვის, ასევე ოფისებისა და მისაღები სივრცეებისთის. მინიმალური ენერგიის გამოყენებით უზრუნველყოფს მაქსიმალურ ჟღერადობას.            SPECIFICATIONS    Component 200 mm (8 in) Full-Range, Dual-cone   Frequency Range (-10 dB) 95 Hz – 18 kHz   Coverage (2 kHz) 90° conical   Sensitivity (2.83V@ 1m) 97 dB (1 kHz - 8 kHz)   Driver Power Capacity 40W (160W peak), 2 hrs 25W (100W peak), 100 hrs   70V/100V Transformer Taps 6W, 3W, 1.5W, (0.75W at 70V only)   Termination Bare Wire   Magnet 10 ounces (283 g)   Safety Agency Transformer is UL registered per UL1876   Installation Full assembly consists of 8138 speaker plus MTC-81BB8 backbox and MTC-81TB8 tile bridge. Four screw holes at industry standard 286 mm  (11.25 in) mounting circle.   Dimensions (Diameter x Depth) 327 mm (12.9") diameter baffle x 84 mm (3.3") depth from back of baffle. Overall depth, 99 mm (3.9")   Mounting Points 4 points on 286 mm (11.25 in) diameter mounting circle   Ceiling Cutout Dimension 300 mm (11.75") with tile bridge and backbox. 228 mm (9.0") diameter as stand alone.   Net Weight 1.4 kg (3.0 lb)   Included Accessories Integral grille, 4 pcs M4 x 40 mm tapping screws   Optional Accessories MTC-81BB8 backcan MTC-81TB8 tile bridge
183
JBL C50PACK
 კონტროლ 50 სერია- საბვუფერი+სატელიტური დინამიკების სისტემაა, რომელიც უზრუნველყოფს ფონური გახმოვანების პრემიუმ კლასით შესრულებას ისეთი დაწესებულებებისათვის, როგორიცაა: მაღაზიები, რესტორნები, კაფეები, ჯანმრთელობის ცენტრები თუ მოსასვენებელი სივრცეები.  SPECIFICATIONS   Frequency Range (-10 dB) 32 Hz – 20 kHz   Frequency Response (±3 dB) 50 Hz – 17 kHz   Power Capacity 200 Watts Continuous Program Power (100 hrs) 100 Watts Continuous Pink Noise (100 hrs)   Nominal Sensitivity (2.83V, 1m) 87 dB (subwoofer center of wall, higher sensitivity depending on subwoofer boundary loading, see application note)   Nominal Impedance 4 ohms (in bypass/thru mode) with 4 satellites   Transformer Taps 80W, 40W, 20W, (& 10W @ 70V), plus bypass/thru (listed as 8 ohms on switch to indicate subwoofer impedance
2465
JBL CBT 50LA-1
Line Array კედლის პასიური დინამიკი, უზრუნველყოფს მაღალი სიხშირის ჟღერადობის გავრცელებას. SPECIFICATIONS   Components Eight 50 mm (2 in) Full-Range   Frequency Range (-10 dB) 80 Hz – 20 kHz   Coverage Pattern Vertical 20° (1.5 kHz - 16 kHz, ±10°) Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°)   Sensitivity (2.83V@ 1m) 93 dB (speech mode, 2 kHz - 14 kHz) 89 dB (music mode, 300 Hz - 18 kHz)   Nominal Impedance 8 ohms   Power Capacity  (8 ohm setting) 150W (600W peak), 2 hrs 100 W (400W peak), 100 hrs   Max SPL Speech mode: 115 dB cont ave (121 peak) Music mode: 111 dB cont ave (117 peak)   70V/100V Transformer Taps 60W, 30W, 15W, (7.5W at 70V only), and 8Ω thru, via switch   Enclosure Fiberglass reinforced ABS cabinet, painted aluminum grille   Outdoor Capability IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.   Colors Black or White (-WH)   Insert Points Ten M6 insert points on back panel.   Mounting Included swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.   Dimensions (H x W x D) 528 x 99 x 153 mm (20.8 x 3.9 x 6.0 in)   Net Weight 4.1 kg (9.0 lb)   Included Accessories Swivel (pan) / tilt wall bracket   Optional Accessories MTC-PC2 terminal panel cover MTC-CBT-FM1 flush-mount low-profile wall-mount bracket  MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand
1760.4
JBL CBT 70J-1 + 70JE-1 System
 line array სერიის CBT 70J-1 დინამიკი კომბინაციაში CBT 70JE-1- თან ერთად უზრუნველყოფს ბას შესრულების მაღალ ხარისხს, ინტეგრირებული კროსოვერი ქსელით.            FEATURES Components: Four 125 mm (5 in) high-power LF drivers (70JE-1) 500 Watt power handling (70JE-1) Built-in purpose-designed crossover network, for combining with CBT 70J-1 (70JE-1) Coupler plate included (70JE-1) Extended pattern control (to 400 Hz for ± 20° control, to 200 Hz for substantial off-axis cancellation) Extended bass response to 45 Hz. Components: Sixteen 25 mm (1 in) soft dome tweeters and eight 125 mm (5 in) high-power LF drivers. Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing. Vertical pattern coverage switchable between 45° for medium-throw coverage and 25° for  long-throw applications. Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode. Coupler plate and wall swivel (pan)/tilt bracket included (rear insert-point pattern fits standard  third-party brackets)
7095.6
JBL Control 126 WT
   Control 126WT წარმოადგენს პრემიუმ ხარისხის  კედლის დინამიკს ისეთი გარემოსთვის, სადაც მაღალი ხარისხის შესრულებას ითხოვენ ოპტიმალურ ვიზუალთან ერთად. განკუთვნილია მისაღები სივრცეებისთვის, კრუიზებისა და აეროპორტებისთვის, ასევე რესტორნებისა და მუზეუმებისთვის.   SPECIFICATIONS   Frequency Range 38 Hz - 20 kHz (-10 dB)   Power Capacity 200 W Peak  100 W Continuous Program Power 50 W Continuous Pink Noise   Transformer Taps 70 V: 30 W, 15 W, 7.5 W & 3.7 W taps   Nominal Impedance 8 ohms   Low Frequency 165 mm (6.5 in) polymer-coated aluminum cone.   High-Frequency 25 mm (1 in) pure-titanium dome with cloth suspension on low-diffraction swivel-mount with -10 degree aimability.   Terminations Screw-down Euroblock-type connector. Max wire size 14 AWG (1.5 mm)2   Crossover Network 3rd order (18 dB/oct) Low Pass to the woofer and 3rd order (18 dB/oct) High Pass to the tweeter.   Optimum Air Cavity Behind Speaker 20 to 40 liters (0.7 to 1.4 cu ft)   Outside Dimensions  (H x W x D) 280 x 215 x 105 mm (11 x 8.5 x 4.1 in), 99 mm (3.8 in) front of wall to  back of speaker.   Maximum Wall Thickness 2 mm (1.25 in)   Cutout Size (H x W) 246 x 181 mm (9.7 x 7.2 in),   Net Weight (ea) 2.7 kg (5.9 lb)   Shipping Weight (ea) 6.2 kg (13.5 lb)   Included Accessories Cutout template & paint shield   Optional Accessories MTC-126RIF Rough-In Frame for new construction installation to wallstuds.  
739.8
JBL Control 128 WT
   Control 128 WT წარმოადგენს პრემიუმ ხარისხის კედლის დინამიკს, განკუთვნილია მისაღები სივრცეების, აეროპორტების, საკრუიზო გემების, მაღაზიებისა და რესტორნებისთვის.   SPECIFICATIONS   Frequency Range 38 Hz - 20 kHz (-10 dB)   Power Capacity 200 W Peak  100 W Continuous Program Power  50W Continuous Pink Noise   Transformer Taps 70 V: 50 W, 25 W, 12 W & 6 W 100 V: 50 W, 25 W, & 12 W   Nominal Impedance 8 ohms   Low Frequency 200 mm (8 in) polymer-coated aluminum cone, pure butyl rubber surround.   High-Frequency 25 mm (1 in) pure-titanium dome with cloth suspension on low-diffraction swivel-mount with -10 degree aimability.   Terminations Screw-down Euroblock-type connector. Max wire size 14 AWG (1.5 mm)2   Crossover Network 2nd order Low Pass to the woofer and 2nd order High Pass to the tweeter.   Optimum Air Cavity  Behind Speaker 40 to 80 liters (1.4 to 2.8 cu ft)   Outside Dimensions (H x W x D) 334 x 257 x 110 mm (13.1 x 10.1 x 4.3 in), 102 mm (4.0 in) front of wall to back of speaker.   Maximum Wall Thickness 32 mm (1.25 in)   Cutout Size (H x W) 300 x 225 mm (11.9 x 8.9 in) Cutout template included.   Net Weight (ea) 3.3 kg (7.2 lb)   Shipping Weight (ea) 7.8 kg (17.2 lb)   Included Accessories Cutout template & paint shield   Optional Accessories MTC-128RIF Rough-In Frame for new construction installation to wallstuds.  
909.9
JBL Control 14 CT
         Control14 CT   სრული სპექტრის ჭერის დინამიკი, რომლსაც წინასწარ მიმაგრებული დრაივერის კონტეინერი აქვს სწრაფი და მარტივი ინსტალაციისთვის.            SPECIFICATIONS   Frequency Range (-10 dB) 74 Hz – 20 kHz   Power Capacity (at low-Z) 60 Watts Continuous Program Power 30 Watts Continuous Pink Noise   Transformer Taps 25 W, 12.5 W, 6.3 W @ 70V or 100V  (plus 3.2 W @ 70V only)   Frequency Response (±3 dB) 100 Hz – 20 kHz   Nominal Sensitivity 87 dB   Nominal Coverage Angle 120° conical coverage   Directivity Factor (Q) 7.6   Directivity Index (DI) 8.1 dB   Rated Maximum SPL 102 dB @ 1 m (3.3 ft) average, 108 dB peak   Nominal Impedance 8 ohms (in direct/bypass 8Ω setting)   Crossover Network 12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) high-pass to HF driver   LF Driver 100 mm (4.0 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil   HF Driver 19 mm (3/4 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide   Input Connector Removable locking 4-pin connector with screw-down terminals. Max wire size 12 AWG (2.5 mm2)   Connector Wiring Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru   Strain Reliefs Strain relief for two cables or two flex conduits via coupled clamping mechanism   Materials ABS baffle with UL94-V0 and UL94-5VB flame class fire rating. Zinc-plated  steel backcan   Safety Agency UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systems   Dimensions 196 mm diameter x 181 mm depth from back of baffle  (7.7 in diameter x 7.1 in depth)   Ceiling Cutout Size Circular cutout with 170 mm (6.7 in) diameter (cardboard cutout template included)   Ceiling Thickness Range Up to 35 mm (1.4 in) with stock dog-ears. MTC-TCD thick-ceiling dog-ears available for up to 55 mm (2.2 in) ceiling thicknesses   Safety Seismic Attachment One point, top surface   Net Weight 2.2 kg (4.8 lbs, one speaker)   Shipping Weight 8.2 kg (17.9 lbs, pair in master carton)   Included Accessories C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile spans), cutout template, paint shield, removable locking multi-pin connector, grille   Optional Accessories MTC-24NC new construction bracket MTC-24MR mud-ring construction bracket MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 55 mm (2.2 in, ordering one set = 24 dog-ears for 8 speakers) MTC-48TR tile rail for 1200 mm (4 ft) tile spans SPECIFICATIONS ^   Frequency Range (-10 dB) 74 Hz – 20 kHz   Power Capacity (at low-Z) 60 Watts Continuous Program Power 30 Watts Continuous Pink Noise   Transformer Taps 25 W, 12.5 W, 6.3 W @ 70V or 100V  (plus 3.2 W @ 70V only)   Frequency Response (±3 dB) 100 Hz – 20 kHz   Nominal Sensitivity 87 dB   Nominal Coverage Angle 120° conical coverage   Directivity Factor (Q) 7.6   Directivity Index (DI) 8.1 dB   Rated Maximum SPL 102 dB @ 1 m (3.3 ft) average, 108 dB peak   Nominal Impedance 8 ohms (in direct/bypass 8Ω setting)   Crossover Network 12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) high-pass to HF driver   LF Driver 100 mm (4.0 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil   HF Driver 19 mm (3/4 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide   Input Connector Removable locking 4-pin connector with screw-down terminals. Max wire size 12 AWG (2.5 mm2)   Connector Wiring Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru   Strain Reliefs Strain relief for two cables or two flex conduits via coupled clamping mechanism   Materials ABS baffle with UL94-V0 and UL94-5VB flame class fire rating. Zinc-plated  steel backcan   Safety Agency UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systems   Dimensions 196 mm diameter x 181 mm depth from back of baffle  (7.7 in diameter x 7.1 in depth)   Ceiling Cutout Size Circular cutout with 170 mm (6.7 in) diameter (cardboard cutout template included)   Ceiling Thickness Range Up to 35 mm (1.4 in) with stock dog-ears. MTC-TCD thick-ceiling dog-ears available for up to 55 mm (2.2 in) ceiling thicknesses   Safety Seismic Attachment One point, top surface   Net Weight 2.2 kg (4.8 lbs, one speaker)   Shipping Weight 8.2 kg (17.9 lbs, pair in master carton)   Included Accessories C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile spans), cutout template, paint shield, removable locking multi-pin connector, grille   Optional Accessories MTC-24NC new construction bracket MTC-24MR mud-ring construction bracket MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 55 mm (2.2 in, ordering one set = 24 dog-ears for 8 speakers) MTC-48TR tile rail for 1200 mm (4 ft) tile spans  
396.9
JBL Control 16 CT
          Control 16 CT   სრული სპექტრის ჭერის დინამიკი, რომლსაც წინასწარ მიმაგრებული დრაივერის კონტეინერი აქვს სწრაფი და მარტივი ინსტალაციისთვის.           SPECIFICATIONS   Frequency Range (-10 dB) 62 Hz – 20 kHz   Power Capacity (at low-Z) 100 Watts Continuous Program Power 50 Watts Continuous Pink Noise   Transformer Taps 30 W, 15 W, 7.5 W @ 70V or 100V  (plus 3.8 W @ 70V only)   Frequency Response (±3 dB) 96 Hz – 15 kHz   Nominal Sensitivity 91 dB   Nominal Coverage Angle 110° conical coverage   Directivity Factor (Q) 7.8   Directivity Index (DI) 8.2 dB   Rated Maximum SPL 108 dB @ 1 m (3.3 ft) average, 116 dB peak   Nominal Impedance 8 ohms (in direct/bypass 8Ω setting)   Crossover Network 12 dB/oct (2nd order) low-pass to LF driver,  12 dB/oct (2nd order) high-pass to HF driver   LF Driver 165 mm (6.5 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil   HF Driver 19 mm (3/4 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide   Input Connector Removable locking 4-pin connector with screw-down terminals. Max wire size 12 AWG (2.5 mm2)   Connector Wiring Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru   Strain Reliefs Strain relief for two cables or two flex conduits via coupled clamping mechanism   Materials ABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated  steel backcan   Safety Agency UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systems   Dimensions 253 mm diameter x 225 mm depth from back of baffle (10.0 in diameter x 8.8 in depth)   Ceiling Cutout Size Circular cutout with 223 mm (8.8 in) diameter (cardboard cutout template included)   Ceiling Thickness Range Up to 38 mm (1.5 in) with stock dog-ears. MTC-TCD thick-ceiling dog-ears available for up to 60 mm (2.4 in) ceiling thicknesses   Safety Seismic Attachment One point, top surface   Net Weight 3.4 kg (7.4 lbs, one speaker)   Shipping Weight 11.2 kg (24.7 lbs, pair in master carton)   Included Accessories C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile spans), cutout template, paint shield, removable locking multi-pin connector, grille   Optional Accessories MTC-26NC new construction bracket MTC-26MR mud-ring construction bracket MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 60 mm (2.4 in, ordering one set = 24 dog-ears for 6 speakers)  MTC-48TR tile rail for 1200 mm (4 ft) tile spans  
535
JBL Control 18CT
  Control 18 CT   სრული სპექტრის ჭერის დინამიკი, რომლსაც წინასწარ მიმაგრებული დრაივერის კონტეინერი აქვს სწრაფი და მარტივი ინსტალაციისთვის. დინამიკი შექმნილია  საშუალო და მაღალი ჟღერადობის წარმოსაქმენალდ ისეთი ობიექტებისთვის, როგორებიცაა:  კაფე-ბარები, მაღაზიები, აეროპორტი და მისაღები სივრცეები, სასტუმროები და მსგავსი დაწესებულებები.           SPECIFICATIONS   Frequency Range (-10 dB)1 58 Hz – 20 kHz   Frequency Response (±3 dB)1 80 Hz – 16 kHz   Power Capacity (at low-Z) 2 180 Watts Continuous Program Power   Maxium Input Voltage 31.8 V RMS (2hrs), 63.6 V peak   Nominal Sensitivity3 92 dB   Nominal Coverage Angle3 90° conical coverage   Directivity Factor (Q) 3 6.0   Directivity Index (DI) 3 7.8 dB   Rated Maximum SPL 112 dB @ 1 m (3.3 ft) average, 118 dB peak   Nominal Impedance 8 ohms (in direct/bypass 8Ω setting)   Transformer Taps 60 W, 30 W, 15 W @ 70V or 100V (plus 7.5 W @ 70V only)   Recommended Protective High-Pass4 45 Hz high-pass (24 dB/oct) for 8ohm operation, 60 Hz for 60 W tap, 50 Hz for 30 W, 15 W & 7.5 W tap setting   Crossover Network 12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) high-pass to HF driver   LF Driver 200 mm (8.0 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil   HF Driver 25 mm (1.0 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide   Input Connector Removable locking 4-pin connector with screw-down terminals. Max wire size 12 AWG (2.5 mm2)   Connector Wiring Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru   Strain Reliefs Strain relief for two cables or two flex conduits via coupled clamping mechanism   Materials ABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated steel backcan   Safety Agency UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systems   Dimensions 307 mm diameter x 274 mm depth from back of baffle (12.1 in diameter x 10.8 in depth)   Ceiling Cutout Size Circular cutout with 282 mm (11.1 in) diameter (cardboard cutout template included)   Ceiling Thickness Range Up to 38 mm (1.5 in) with stock dog-ears. MTC-TCD thick-ceiling dog-ears available for up to 60 mm (2.4 in) ceiling thicknesses   Safety Seismic Attachment One point, top surface   Net Weight 6.4 kg (14.1 lbs, one speaker)   Shipping Weight 17.7 kg (39.0 lbs, pair in master carton)   Included Accessories C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile spans), cutout template, paint shield, removable locking multi-pin connector, grille with safety tether.   Optional Accessories MTC-47NC new construction bracket; MTC-47MR mud-ring construction bracket; MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 60 mm (2.4 in, ordering one set = 24 dogears for 6 speakers); MTC-48TR tile rail for 1200 mm (4 ft) tile spans   1 Half-space (flush mounted in ceiling) 2 Continuous Pink Noise Rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous Program Power is a conservative expression of the system’s ability to handle normal speech and music program material, and is defined as 3 dB above the Continuous Pink Noise Rating. 3 Half-space (in ceiling) average 1 kHz to 16 kHz. 4 For protection against driving below resonant frequency and to keep transformer out of saturation. JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy.  
693.9
JBL Control 19CST
 Control 19CST  წარმოადგენს ჭერის საბვუფერს, უზრუნველყოფს ძლიერ ბას ჟღერადობას.   SPECIFICATIONS   Frequency Range 42 Hz - 200 Hz   Power Capacity 200 W Continuous Program Power   Transformer Taps 70 V: 75 W, 30 W, 15 W & 7.5 W  100 V: 75 W, 30 W, & 15 W   Nominal Coverage Angle 180° conical coverage   Rated Maximum SPL 115 dB @ 1 m (3.3 ft) in ceiling near corner (π/2)   Nominal Impedance 8 ohms   Low Frequency 200 mm (8.0 in) Polypropelene cone. 38 mm (1.5 in) coil on aluminum former   Enclosure Material Backcan: Formed steel Baffle/Rim: Medium impact polystyrene, fire rated UL94V-0   Terminations Removable locking connector with screw-down terminals. 2 input terminals and 2 loop-thru output terminals. Max. wire size 12 AWG (2.5 mm2)   Safety Agency Rating In accordance with IEC60849 / EN60849. Suitable for use in air handling spaces, per U.L.-2043, U.L.-1480, NFPA90, NFPA70A.   Outside Dimensions (H x Dia) 345 x 345 mm (13.6 x 13.6 in) 318 mm (12.5 in) front of ceiling tile to back of backcan   Cutout Size (H x W) 305 mm (12.0 in)   Net Weight (ea) 6.3 kg (14 lb)   Shipping Weight (pair) 14.3 kg (32 lb)   Included Accessories C-shaped support backing plate 2 tile support rails (fits both 2 x 4 ft or 600 x 1200 mm tiles) Cutout template Paint shield Removable locking wiring connector  
980.1
JBL Control 226 CT
         Control 226C/T წარმოადგენს პრემიუმ ხარისხის ჭერის დინამიკს, უზრუნველყოფს ხმისა და ვოკალის უმაღლეს ხარისხს.           SPECIFICATIONS   Frequency Range (-10 dB) 47 Hz - 19 kHz   Power Capacity 150 W on 8-ohm setting   Tap Settings 68W, 34W, 17W (plus 8.5W at 70V)   Sensitivity 90 dB 95 dB computed for competitive comparison   Coverage 120 degrees   Low Frequency 165 mm (6.5 in) woofer Kevlar reinforced cone   High Frequency 25 mm (1 in) exit compression driver   Dimensions (H x Dia) Ø 330 mm (13 in) round baffle x depth from back of baffle of 246 mm (9.7 in)   Net Weight (ea) 9.1 kg (20.0 lb)   Shipping Weight (pair) 23.9 kg (52.5 lb)  
1285.2
JBL Control 227 CT
  Control 227 CT წარმოადგენს 150 ვატიან, პრემიუმ ხარისხის ჭერის დინამიკს, მოწინავე კროსოვერი ქსელით უზრუნველყოფს ხმისა და ვოკალის უმაღლეს ხარისხს.    SPECIFICATIONS   Frequency Range (-10 dB) 43 Hz - 19 kHz   70/100 Volt taps 68W, 34W, 17W (plus 8.5W at 70V)   Nominal Sensitivity 90 dB measured half-space 95 dB computed for competitive comparison   Coverage 120 degrees   Frequency Response (-3 dB) 75 Hz - 17 kHz   Low Frequency 165 mm (6.5 in) Kevlar reinforced cone   High Frequency 25 mm (1 in) exit compression driver   Dimensions (H x Dia) Ø 305 mm (12 in) round baffle x depth from back of baffle of 147 mm (5.8 in)   Net Weight (ea) 5.2 kg (11.5 lb)   Shipping Weight (pair) 6.6 kg (14.5 lb)
1166.4
JBL Control 23-1
JBL-ის CONTROL სერიის დინამიკები უზრუნველყოფს ფართო დაფარვის კუთხეს, მისი დიზაინი მრავალმხრივი მონტაჟის საშუალებას იძლევა და ნებისმიერი დეკორისთვის შესაფერისია. დინამიკი განკუთვნილია მცირე ზომის რესტორნებისთვის, ბარებისთვის, კაფეებისთის, საგანმანათლებლო დაწესებულებისთვის, როგორც ღია, ასევე დახურული სივრცეებისთვის. კარგად უძლებს ნესტსა და ტემპერატურას. SPECIFICATIONS   Frequency Range (-10 dB) 70 Hz to 20 kHz   Frequency Response (+/-3 dB) 95 Hz - 19 kHz   Power Rating 100W Continuous Program (2 hrs) 50 W (200W peak), Continuous Pink Noise (2 hrs) 40 W (160W peak) Continuous Pink Noise (100 hrs)   Maximum Input Voltage 17.2 V RMS (2 hrs), 34.4 V peak   Maximum SPL 103 dB ave. Continuous Pink Noise (109 dB peak)   Sensitivity 86 dB, 1W/1m (ave. 100 Hz – 10 kHz)   Coverage Angle 100° x 100°   Directivity Factor (Q) 5.8 (averaged 1kHz – 16kHz)   Directivity Index (DI) 7.2 dB (averaged 1kHz – 16kHz)   Nominal Impedance 8 ohms (THRU setting)   Crossover Type 2nd order low-pass, 2nd order high-pass   Transformer Taps 70V: 15W, 7.5W, 3.7W, 1.8W 100V: 15W, 7.5W, 3.7W Insertion Loss <0.43 dB at any tap setting Thru Setting: 8Ω nominal   Recommended Protective High-Pass 70 Hz high-pass (24 dB/oct) (for 8Ω operation and for all 70V/100V taps settings).   Low Frequency Driver 76 mm (3.0 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton™ voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.   High Frequency Driver 13 mm (0.5 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
539
JBL Control 24CT
 Control 24CT წარმოადგენს კომპაქტურ ჭერის დინამიკს, უზრუნველყოფს ფონური მუსიკის მაღალ ხარისხს.   SPECIFICATIONS   Frequency Range 80 Hz - 20 kHz   Power Capacity 80 W Continuous Program Power; 40 W Continuous Pink Noise   Transformer Taps 70 V: 30 W, 15 W, 7.5 W & 3.7 W taps 100 V: 30 W, 15 W, & 7.5 W taps   Nominal Coverage Angle 130° conical coverage   Directivity Factor (Q) 2.4 dB averaged 500 Hz to 4 kHz   Directivity Index (DI) 3.8 dB averaged 500 Hz to 4 kHz   Rated Maximum SPL 102 dB @ 1 m (3.3 ft)   Nominal Impedance 16 ohms (Min Z 16.1 ohms @ 320 Hz)  
504.9
JBL Control 24CT Micro
  Control 24CT Micro წარმოადგენს ჭერის დინამიკს, უზრუნველყოფს  ფონურის მუსიკის მაღალ ხარისხს.   SPECIFICATIONS   Frequency Range 85 Hz - 25 kHz   Power Capacity 30 W Continuous Program Power; 15 W Continuous Pink Noise   Transformer Taps 70 V: 9 W, 4 W, 2 W, 1 W & 0.5 W taps 100 V: 9 W, 4 W, 2 W, 1 W taps   Crossover Frequency 3.5 kHz   Rated Maximum SPL 94 dB @ 1 m (3.3 ft), 9 W tap  
359
JBL Control 24CT Micro Plus
  Control 24CT Micro Plus წარმოადგენს ჭერის დინამიკს, დაფარვის 150 გრადუსიანი კუთხით უზრუნველყოფს  ფონურის მუსიკის მაღალ ხარისხს.   SPECIFICATIONS   Frequency Range 80 Hz - 25 kHz   Power Capacity 30 W Continuous Program Power; 15 W Continuous Pink Noise   Transformer Taps 70 V: 25 W, 12 W, 6 W taps 100 V: 25 W, 12 W taps   Nominal Sensitivity 85 dB SPL @ 1 m (3.3 ft)   Crossover Frequency 3.5 kHz, 3rd order low-pass plus 3rd order high-pass with conjugate   Rated Maximum SPL 99 dB @ 1 m (3.3 ft), 25 W tap   Low Frequency 115 mm (4.5 in) IMG (injection molded graphite), 24 mm (1 in) voice coil   High Frequency 12 mm (0.5 in) polycarbonate  
461.7