JBL Control 85M


გარე გამოყენების სოკო დინამიკი შექმნილია ნებისმიერი ამინდის მიმართ ამტანი მასალით და უზრუნველყოფს მაღალი ხარისხის შესრულებას 360° გრადუსიანი კუთხით.


  Frequency Response (-10dB) 55 Hz – 18 kHz
  Power Rating 160 W Continuous Program (2 hrs)
80 W (320W peak), Continuous Pink Noise (2 hrs) 
45 W (180W peak) Continuous Pink Noise (100 hrs)
  Transformer Taps 70V: 30W, 15W, 7.5W & 3.8W 
100V: 30W, 15W, 7.5W
  Frequency Response (±3 dB) 65Hz - 16 kHz
  Maximum Input Voltage 23.3 V
  Sensitivity 86 dB, 1W @ 1m (ave. 80Hz - 16kHz)
  Nominal Coverage Angle 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).
  Directivity (Q) 2.2
  Directivity Index (DI) 3.4 dB
  Maximum SPL 105 dB @ 1m
  Nominal Impedance 8Ω (at 8Ω setting)
  Insertion Loss <1.0 dB at any tap setting
  Thru Setting 8Ω nominal
  Crossover Type 2nd Order LPF on LF and 2nd Order HPF on HF
  Recommended Protective High-Pass 65 Hz for 8Ω operation, 24 dB/oct 
60 Hz for 30W tap, 24 dB/oct 
50 Hz for 15W, 7,5W, and 3.7W taps, 24 dB/oct
  Low Frequency Driver 135 mm (5.25 in) diameter LF driver, Kapton™ former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround.
  High Frequency 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome.
  Enclosure Material LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
  Grille Powder coated stainless steel.
  Environmental IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
  Agency Ratings UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
  Terminals Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section).
  Wiring Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For installation instructions see Installation Guide (# IS C80MLS).
  Colors Hunter Green, RAL6018
  Dimensions (H x W x D) 432 x 291 x 291mm (17 x 11.5 x 11.5 in.)
  Net Weight 5.5 kg (12 lb)
  Shipping Weight 7.3 kg (16 lb)
  Included Accessories (2) wire nuts, (2) gland nuts, (1) right-angle screwdriver
  Installer-Supplied Required Tools 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.


პროდუქტის კოდი