DBX 223s

Input Connectors

1/4" TRS

Input Type

Electronically balanced/unbalanced, RF filtered

Input Impedance

Balanced >50k ohm, unbalanced >25k ohm

Max Input

>+22dBu balanced or unbalanced

CMRR

>40dB, typically >55dB at 1kHz

Output Connectors

1/4" TRS

Output Type

Impedance-balanaced/unbalanced, RF filtered

Output Impedance

Balanced 200 ohm, unbalanced 100 ohm

Max Output

>+21dBu balanced/unbalanced into 2k ohms or greater

Bandwidth

20Hz to 20kHz, +/-0.5dB

Frequency Response

< 3 Hz to > 90 kHz, +0/-3 dB

Signal to Noise Ratio

Ref: +4 dBu, 22 kHz measurement bandwidth

Signal-to-Noise (Stereo Mode)

>94dB (Low Output), >91dB (High Output)

Signal-to-Noise (Mono Mode)

>94dB (Low Output), >93dB (Mid Output), >91dB (High Output)

Dynamic Range

> 106 dB, unweighted, any output

THD+Noise

< 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz

Interchannel Crosstalk

< -80 dB, 20 Hz to 20 kHz

Crossover Frequencies (Stereo Mode)

Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)

Crossover Frequencies (Mono Mode)

Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)

Crossover Filter Type

Linkwitz-Riley, 24 dB/octave, state-variable

Low cut Switch

Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.

Phase Invert Switch

Inverts the phase at the output, one switch per output.

x1 / x10 Switch

Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.

Mode Switch

Selects stereo/mono and 2/3-way operation

LF Sum Switch

Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2’s low output phase invert LED to indicate that this output is not operational in the LF sum mode.

Indicators

Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)

Operating Voltage

100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ

Operating Temperature

32°F to 113°F (0°C to 45°C)

Power Consumption

15W

Power Connector

IEC receptacle

Dimensions

1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)

Unit Weight

3.7 lbs. (1.7 kg)

Shipping Weight

5.4 lbs. (2.5 kg)