ორ არხიანი 15 ზოლიანი ეკვალაიზერი სტანდარტია სტუდიური და აუდიო ინსტალაციებისათვის. 215 S გთავაზობთ განსაკუთრებულ ხმას და აკმაყოფილებს ყველა მოთხოვნას ხმის გასაძლიერებლად. Specifications Input Connectors 1/4" TRS, female XLR (pin 2 hot) Input Type Electronically balanced/unbalanced, RF filtered Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm Max Input >+21dBu balanced or unbalanced CMRR >40dB, typically >55dB at 1kHz Output Connectors 1/4" TRS, male XLR (pin 2 hot) Output Type Impedance-balanced/unbalanced, RF filtered Output Impedance Balanced 100 ohm, unbalanced 50 ohm Max Output >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm) Bandwidth 20Hz to 20kHz, +0.5/-1dB Frequency Response <10Hz to >50kHz, +0.5/-3dB Dynamic Range Typically >112dB Signal to Noise Ratio Typically >95dB THD+Noise <0.003% Interchannel Crosstalk <-90db, 20Hz to 20kHz Bypass Switch Bypasses the graphic equalizer section in the signal path Low cut Switch Activates the 50Hz 12dB/octave Bessel high-pass filter Range Switch Selects either +/- 6dB or +/- 12dB slider boost/cut range Operating Voltage 100VAC-240VAC 50/60Hz Power Consumption 15W Power Connector IEC receptacle Unit Weight 4.8 lbs.(2.2 kg) Shipping Weight 6.2 lbs.(2.8kg) Dimensions 1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm) W  

In-ear monitor amplifier for personal monitor applications High power and "drummer proof" headphones output Dual XLR inputs allow for 2-channel mono or stereo operation Switchable stereo/mono operation with mix function Level and Balance/Mix controls Runs up to 12 hours on a 9 V battery (not included) Battery control with dual LED indicators Operates on Behringer PSU-SB DC power supply (not included) Integrated current limit protects your ears and headphone Convenient belt-pack clip included Mounts easily on a standard mic stand with 5/8" and 3/8" thread "Built-like-a-tank", impact-resistant metal chassis

In-ear monitor amplifier for personal monitor applications Ultra-compact and lightweight design High power and "drummer proof" headphones output XLR and TRS input connector with locking mechanism Level control with power on/off switch Stereo/mono source switch (internal) Runs up to 12 hours on 2 AAA batteries (not included) Battery control with LED indicators Integrated current limit protects your ears and headphone Convenient belt-pack clip included "Built-like-a-tank", impact-resistant metal chassis

 ეს არის სუბჰარმონიული სინთეზატორი, შექმნილი პროფესიონალთა აუდიო საჭიროებების შესაბამისად. წლების მანძილზე სინთეზატორი იყო დიჯეების და ხმის პროფესიონალების საიდუმლო იარაღი შთაბეჭდილების მოსახდენად, რომელიც ნებისმიერი სხვა მოწყობილობიდან იყო შეუძლებელი. წარმოქმნის ახალ, ტრანსფორმირებულ ბგერებს.  Specifications Connector 1/4" TRS jacks (inputs and outputs) RCA inputs Input Impedance >= 40k ohm Bal or 20k ohm unbal. (1/4") 20k ohm (RCA) Max Input +22dBu (1/4") +8.5dBV (RCA) Output Impedance 100 ohm, Impedance balanced Max Output +22 dBu into 600 ohm Frequency Response 20Hz-20kHz ±0.5dB, (no synthesis, full-range mode) 15Hz-90kHz +0, -3dB THD 0.05% (no synthesis, either output) Noise -88dBu, controls@max., 22Hz > 22kHz unweighted (full range output) Dynamic Range 112dB Synthesis Frequency Range 26-56Hz (from 54-110Hz input signal) Crossover 12dB/octave high pass (-3dB @ 80 Hz or 120Hz); 6dB/octave derived low pass. Phase-coherent (unity-sum) Indicators Power, Crossover, Bypass Metering Synthesis activity (3 LEDs per band) Controls 26-36Hz and 36-56Hz Band Synthesis Level, Subharmonics, Low Frequency Boost, Subwoofer Output Crossover Frequency, Select, Crossover in/out Power Supply 1.75"x19"x6.2" (4.5cm x 48.3cm x 15.75cm) Rack Space 1 Rack Unit Unit Weight 4.75 lbs/2.2kg Shipping Weight 8 lbs./3.7kg

131s აკმაყოფილებს ყველაზე მოთხოვნადი ხმის გამაძლიერებელი მოწყობილობების ბაზრის  საჭიროებებს, გვთავაზობს კონტროლის მარტივ ინტერფეისს. 31 ზოლიანი გრაფიკული ეკვალაიზერი ქმნის გამორჩეულ ხმას. სტანდარტია სტუდიურ და აუდიო მონტაჟის ინდუსტრიაში.  Specifications Input Connectors 1/4" TRS, female XLR (pin 2 hot) Input Type Electronically balanced/unbalanced, RF filtered Input Impedance Balanced 40k ohm, unbalanced 20k ohm Max Input >+21dBu balanced or unbalanced CMRR >40dB, typically >55dB at 1kHz Output Connectors 1/4" TRS, male XLR (pin 2 hot) Output Type Impedance-balanced/unbalanced, RF filtered Output Impedance Balanced 100 ohm, unbalanced 50 ohm Max Output >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm) Bandwidth 20Hz to 20kHz, +0.5/-1dB Frequency Response <10Hz to >50kHz, +0.5/-3dB Dynamic Range Typically >112dB Signal to Noise Ratio Typically >95dB THD+Noise <0.003% Interchannel Crosstalk <-90dB, 20Hz to 20kHz Bypass Switch Bypasses the graphic equalizer section in the signal path Low cut Switch Activates the 50Hz 12dB/octave high-pass filter Range Switch Selects either +/- 6dB or +/-12dB slider boost/cut range Operating Voltage 100-240VAC 50/60Hz Power Consumption 15W Power Connector IEC receptacle Unit Weight 4.8 lbs.(2.2 kg) Shipping Weight 6.2 lbs.(2.8kg) Dimensions 1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm) W  

 DBX 160a ეს არის აუდიო კომპრესორების მსოფლიოს ყველაზე პოპულარული ხაზი. მყარი კონსტრუქცია, დიდებული ჟღერადობა და დიზაინი განსაზღვრავს მის პოპულარობას მუსიკოსებში, ხმის ჩამწერ სტუდებსა და სამაუწყებლო მედიაში. მარტივი ოპერაციულობისა და მრავალმხრივობის წყალობით მსოფლიო სტანდარტად აღიარებული მოდელია. Specifications Input Connectors 1/4" TRS and XLR, Floating Balanced; XLR: Pin 2 hot Phone: Tip Hot Input Impedance 40k Max Input +24dBu, Balanced or Unabalanced (Absolute) CMRR >45dB (any Frequency) Detector Input Connector: 14" TRS phone, Floating Balanced Detector Input Impedance >200k Detector Input Max Level +28dBu, Balanced or Unbalanced Output Connectors 1/4" TRS phone, Unbalanced; XLR, floating balanced; pin 2 hot Output Impedance Balanced 200 ohm, unbalanced 100 ohm Max Output (Balanced): +24dBm; <0.3% THD; (Unbalanced): +20dBm; <0.3% THD Noise <-90dBu, Unweighted (20Hz - 20kHz) Frequency Response 20Hz -20kHz, +0, -0.5dB; +0, -3dB 0.5Hz and 90kHz. THD <0.2%, Typical, any amount of compression up to 40dB @ 1kHz Compressor Threshold Range -40dBu to +20dBu Compressor Threshold Characteristic OverEasy® or hard knee Compressor Ratio Variable 1:1 to :1 thru to -1:1; >60dB maximum compression Compressor Attack Time Program dependent; typically 15ms for 10dB, 5ms for 20dB, 3ms for 30dB Compressor Release Time Program Dependent; Typically 8ms for 1dB, 80ms for 10dB, 400ms for 50dB; 125dB/sec rate Dynamic Range >113dB Gain Adjustment Range Variable from -20dB to +20dB Stereo Coupling True RMS Power summing Summing 1/4" TRS phone jack Operating Voltage DO: 90-130VAC, 50/60Hz; EU: 200-250VAC, 50/60Hz Power Connector IEC receptacle Dimensions 1.75" x 19" x 6.5" (4.45cm x 48.2cm x 16.51cm) Unit Weight 4.452 lbs (1.99 kg) Shipping Weight 6.62 lbs (2.99 kg)  

 დინამიკების დიდებული ხმის საიდუმლო მდგომარეობს კროსოვერში. dbx 223s იყენებს ფილტრებს, რათა გამოარჩიოს აუდიო სიგნალები და მიმართოს შესაბამისი სიხშირეები დინამიკის დრაივერისკენ.  Specifications Input Connectors 1/4" TRS Input Type Electronically balanced/unbalanced, RF filtered Input Impedance Balanced >50k ohm, unbalanced >25k ohm Max Input >+22dBu balanced or unbalanced CMRR >40dB, typically >55dB at 1kHz Output Connectors 1/4" TRS Output Type Impedance-balanaced/unbalanced, RF filtered Output Impedance Balanced 200 ohm, unbalanced 100 ohm Max Output >+21dBu balanced/unbalanced into 2k ohms or greater Bandwidth 20Hz to 20kHz, +/-0.5dB Frequency Response < 3 Hz to > 90 kHz, +0/-3 dB Signal to Noise Ratio Ref: +4 dBu, 22 kHz measurement bandwidth Signal-to-Noise (Stereo Mode) >94dB (Low Output), >91dB (High Output) Signal-to-Noise (Mono Mode) >94dB (Low Output), >93dB (Mid Output), >91dB (High Output) Dynamic Range > 106 dB, unweighted, any output THD+Noise < 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz Interchannel Crosstalk < -80 dB, 20 Hz to 20 kHz Crossover Frequencies (Stereo Mode) Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) Crossover Frequencies (Mono Mode) Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) Crossover Filter Type Linkwitz-Riley, 24 dB/octave, state-variable Low cut Switch Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. Phase Invert Switch Inverts the phase at the output, one switch per output. x1 / x10 Switch Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. Mode Switch Selects stereo/mono and 2/3-way operation LF Sum Switch Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2’s low output phase invert LED to indicate that this output is not operational in the LF sum mode. Indicators Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) Operating Voltage 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ Operating Temperature 32°F to 113°F (0°C to 45°C) Power Consumption 15W Power Connector IEC receptacle Dimensions 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) Unit Weight 3.7 lbs. (1.7 kg) Shipping Weight 5.4 lbs. (2.5 kg)  

 dbx 286s გამორჩეული პროცესორია, რომელიც წამოადგენს სტუდიური ხარისხის მიკროფონი/ინსტრუმენტების გამაძლიერებელსა და 4 პროცესორს, რომლის გამოყენება შესაძლებელია როგორც დამოუკიდებლად, ასევე კომბინირებულად.  აღმოფხვრის ვოკალურ სიბილობას და ინსრუმენტებისაგან მაღალი სიხშირის დამახინჯებას. XLR Mic შესაერთებელს მარტივად უკავშირდება როგორც პროფესიონალური, ასევე სახლის სტუდიური მიკროფონი. TRS ზოლის შესაერთებელი განკუთვნილია ელექტრონული ინსტრუმენტების დასაკავშირებლად. რეკომენდირებულია სტუდიური მოხმარებისათვის. Specifications Mic Preamp Connector XLR Floating balanced, Pin 2 Hot Mic Preamp Input Impedance ~4.2kΩ Mic Preamp gain 0dB to +60dB Mic Preamp Phantom Power +48VDC, applied to XLR pins 2 and 3 through 6.81kΩ resistors CMRR >40dB, typically 55dB Mic Preamp max input level 0.2Vrms, Gain = 30dB Mic Preamp Equivalent Input Noise (EIN) -125dBu, 22Hz-22kHz, 150Ω source impedance Input Connectors (line) Floating balanced, TIP Hot Input Impedance (line) 10kΩ unbalanced, 20kΩ balanced Max Input (line) >+21dBu, balanced or unbalanced Input Gain Range (line) -15dB to +45 dB Insert Connector 1/4" TRS: Normalled; tip is Send, ring is Return Insert Impedance >5kΩ (ring-return); 100Ω (tip-send) Insert Max Level >+21dBu; >+20dBm (600Ω load-tip) Insert Noise <-84dBu, unweighted (20Hz-20kHz); LINE GAIN Control set to 0dB Insert Distortion <0.01% THD, 20Hz-20kHz, +10dBu Output Connectors 1/4" Balanced/Unbalanced TRS Connectors Output Impedance 100Ω unbalanced, 200Ω balanced Max Output >+21dBu, >+20dBm (600Ω load) Gain Adjustment Range -30dB to +10dB Noise <-80dBu unweighted (20Hz-20kHz); Both Gain Controls set for 0dB, all processing controls OFF Frequency Response 20Hz to 20kHz, +0.5, -0.5dB THD <0.08%THD, 20Hz-20kHz, +10dBu, all Processing Controls OFF Compressor Threshold Range -40dBu to +20dBu Compressor Threshold Characteristic OverEasy® Compressor Ratio >4:1 For input levels beyond 20dB above threshold Max Compression 30dB Compressor Attack Time Program-Dependent; >1s for small level increases, down to 10ms for larage increases Compressor Release Time Program-Dependent; adjustable between approximately 1dB/sec and 75dB/sec Compressor Distortion Typically <0.05%THD, 20Hz-20kHz, 15dB G/R, +10dBu Output, DENSITY @ 0 IMD SMPTE: <0.05%; 60Hz/7kHz 4:1, 15dB G/R, +10dBu Output Level, DENSITY @ 0 De-esser Characteristic Wideband Gain Reduction De-esser Frequency Range 800Hz to 10kHz High Pass, 12dB/octave De-esser Release Time 12dB/octave Program-Dependent; approximately 1mS/dB Enhancer HF Detail Characteristic Program-controlled shelving equalizer, approximately 15dB maximum HF boost Enhancer LF Detail Characteristic Bell-shaped boost @ 80Hz, bell-shaped cut @250Hz, ratio is approximately 2:1 Expander/Gate Threshold Range OFF to +15dBu Expander/Gate Ratio Adjustable 1.5:1 to 10:1 Expander/Gate Max Depth >50dB Expander/Gate Attack Time Program-Dependent, approximately 2mS (at maximum attenuation) Expander/Gate Release Time Program-Dependent, approxiamtely 10mS/dB Expander/Gate Dynamic Range Typically 105dB Power Consumption 15W Operating Voltage DO: 120VAC 60Hz, 100VAC 50/60Hz; EU: 230VAC 50/60Hz Operating Temperature 0°C to 45°C (32°F to 113°F) Dimensions 1.75" x 5.75" x 19" (4.5cm x 14.6cm x 48.5cm) Unit Weight 4.5 lbs/2.04 Kgs Shipping Weight 6.54 lbs/2.97 Kgs  

Features Level and impedance matching function Output impedance: > 600 Ohms Signal pass through connector Output connector: XLR balanced Battery LED indicator Distortion: (THD) < 0.005% at 1kHz, 0dBu Phantom power LED indicator Max Input: +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB) Output Noise: <-100dB unweighted TS and XLR inputs and outputs Frequency response: 10Hz to 70kHz, +0dB/-3dB Attenuation control Phantom Power: +18 volts DC to +48 volts DC Ground lift switch Main/Standby: 9V battery Input Impedance: >250k Ohm Metal Chassis

Features Dual Channel (2) 1/4” 50k Ohm TS Inputs (2) XLR Transformer-Isolated 600 Ohm Input/Outputs Passive Circuit Design Continuously Variable Input Attenuator Ground Lift Switch

ეს არის პროცესორი, რომელიც შექმნილია სპეციალურად დინამიკებისათვის, გააჩნია სტერეო და მონო საბვუფერის მხარდაჭერა. დინამიკებს ანიჭებს უკეთეს ხმას, სუფთა და უფრო მაღალ ჟღერადობას. Specifications Input 2 (stereo) line inputs. (1) RTA Mic input Input Connectors (2) Female XLR line inputs. XLR RTA Mic input Input Type Electronically balanced/RF filtered Input Impedance >40k ohm Max Input +20dBu CMRR > 45dB Mic Preamp Phantom Power +15VDC (RTA) Mic Preamp Equivalent Input Noise (EIN) >-110dBu, 22Hz -22kHz, 150Ω Output 2 (Stereo) Line outputs; 2 Sub outputs (mono or stereo) Output Connectors Male XLR Output Type Electronically balanced, RF filtered Output Impedance 120ohm Max Output +20dBu A/D Converter dbx Type IV™ Conversion System A/D Dynamic Range 110 dB A-weighted, >107 dB weighted Type IV Dynamic Range 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW Sample Rate 48kHz D/A Dynamic Range 112 dB A-weighted, 110dB unweighted Dynamic Range >110 dB A-weighted, >107dB unweighted THD+Noise 0.002% typical at +4dBu, 1kHz, 0dB input gain Frequency Response 20Hz – 20kHz, +/- 0.5dB Interchannel Crosstalk < -110 dB, -120dB typical (input-to-output: < -100 dB)

iEQ-15 ეკვალაიზერი პირდაპირი ინტერფეისისა და მყარი კონსტრუქციის წყალობით მაქსიმალურად მოქნილი მოწყობილობაა.  Specifications Input Connectors 1/4" TRS, female XLR (pin 2 hot), and Euroblock Input Type Electronically balanced/unbalanced, RF filtered Insert Impedance Balanced 40k ohm, unbalanced 20k ohm Max Input >+22dBu balanced or unbalanced CMRR >40dB, typically >55dB at 1kHz Output Connectors 1/4" TRS, male XLR (pin 2 hot), and Euroblock Output Type Active-balanaced/unbalanced, RF filtered Output Impedance Balanced >120 ohm, unbalanced >60 ohm Max Output >+20dBu balanced/unbalanced into 2k ohm or greater Frequency Response 20Hz to 20kHz, +0.5/0.25dB Dynamic Range >113dB, "A" weighted THD+Noise <0.003%, typical at +4dBu, 1kHz Interchannel Crosstalk <-80dB, 20Hz to 20kHz Noise Reduction Up to 10dB of dynamic broadband noise reduction Digital Resolution 24 bits Sample Rate 48kHz Latency 2msec Operating Voltage 120VAC 60Hz, 220/240VAC 50/60Hz Power Consumption 17 Watts Power Connector IEC receptacle Dimensions 3.5" H x 19" W x 7.9" D

Gemini RMR-1000 წარმოადგენს სახლის, კლუბებისა და ბარების, სცენური, სტუდიური და  გასართობი დაწესებულებებისთვის განკუთვნილ პროფესიონალურ ციფრულ ფლეიერ/ჩამწერს.  19" 1U Rackmount Design | LCD Screen Gives Visual Feedback Records from any STEREO line source | Records MP3 files | Record direct to SD card or USB Flash drive - Any capacity SD Card Compatible | 3.5mm Jack headphone / line output RCA Output | Rotary headphone volume control Easily playback previously recorded media | AC power cord inlcuded.

   Alpha studio ჩამწერი მაქსიმალურად კომპაქტური დიზაინის მოწყობილობაა, თუმცა გააჩნია ყველა ის ფუნქცია, რაც პროფესიონალური შედეგისთვისაა საჭირო. ეს არის სრულყოფილი გადაწყვეტა, რადგან  USB I/O მიქშერი Cubase LE 5-თან ერთად, ორი შემავალი, ორი ბასი, 2-გამომავალი USB I/O მიქშერი და ყურსასმენის განცალკვებული შესაერთებელი საშუალებას იძლევა ნებისმიერ ადგილას არათუ ჩაწერო, არამედ შექმნა მიქსი. FOUR INPUTS: RECORD UP TO TWO TRACKS AT ONCE! Stereo line inputs for keyboards, drum machines or analog output of a CD/MP3 player. RF-filtered TRS active-balanced inputs accept either balanced or unbalanced signals. Low-noise mic preamp with balanced XLR inputs. High-impedance front panel input for electric guitar or bass. PROFESSIONAL MIXER FEATURES Separate mic and line level input controls with individual peak indicators. Monitor mix control for balancing an audio source between live input and playback mix level while recording. Can be switched to stereo or mono. High-powered headphone amp offers ultra-clear fidelity while delivering ample power for any type of headphones. RF-filtered and TRS balanced Line outputs for speaker monitoring. USB POWERED Connect to your computer with the included USB cable. No need for a power supply…so you can record anywhere you can take your laptop.

LAMBDA ეს არის აპარატურა და პროგრამული უზრუნველყოფა, რომლის საშუალებით შესაძლებელია, როგორც ჩაწერა, ასევე მიქსის შექმნა. კომპიუტერის, მიკროფონისა და მუსიკალური შთაგონების დახმარებით  Lambda საშუალებას მოგცემთ ჩაწეროთ ვოკალურ-ინსტრუმენტალური სიმღერა.  მას გააჩნია ფენტომ ფაუერი პროფესიონალური კონდენსატორი მიკროფონებისთვის. ასევე შესაძლებელია კლავიშის, დრამებისა და ფონური მუსიკის უზრუნველყოფა CD ან MP3 ფლეერიდან.  წინა პანელზე აქვს ელექტრო და ბას გიტარის პორტი, ასევე ყურსასმენებისთვის განკუთვნილი პორტი. ბალანსირებული ანალოგი ხაზის საშუალებით შესაძლებელია დინამიკებთან დაკავშირებაც.   FIVE INPUTS: RECORD UP TO TWO TRACKS AT ONCE! Stereo line inputs for keyboards, drum machines or analog output of a CD/MP3 player. RF-filtered TRS active-balanced inputs accept either balanced or unbalanced signals. Two low-noise mic preamplifiers with phantom power for studio condenser mics. High-impedance front panel input for electric guitar or bass. PROFESSIONAL MIXER FEATURES Separate mic and line level input controls with individual peak indicators. Monitor mix control for balancing an audio source between live input and playback mix level while recording. Can be switched to stereo or mono. 2-channel, 4-segment bargraph meter to monitor exact levels of the analog-to-digital converters. High-powered headphone amp offers ultra-clear fidelity while delivering ample power for any type of headphones. RF-filtered and TRS balanced Line outputs for monitoring through powered speakers or recording to an analog source such as a cassette deck. TRS inserts let you add your favorite outboard processors to either mic input channel. MIDI IN/OUT Fully opto-isolated MIDI input eliminates ground loop hum and MIDI talk-through noise. MIDI output has rock-solid sync to USB frame rate. USB POWERED Connect to your computer with the included USB cable. No need for a power supply…so you can record anywhere you can take your laptop.